AP-1000 Series Auto Blow-Fed Part Placers

Dixon's Model AP-1000 Blow-Fed Part Placer/Press can be tooled to place and press cylindrical piece parts up to .59 inches (15mm) in diameter and up to 2.0 inches (50mm) in length via track feeding while components up to .43 inches (11mm) in diameter and up to 4.5 inches (114mm) in length can be blow fed. The Model AP-1000 has a standard stroke of 6 inches (152mm), and a pressing force of 1000 pounds (4.45 kN). The pressing force is determined by the diameter of the placement shaft (punch), and the length of stroke required for the pressing application. The Model AP-1000 can be purchased complete with a vibratory feed system, mounting structure, and interlocking controls. These components may be purchased separately or as a complete package.

• Tooled for various part diameters and lengths
• 35 - 100mm Jaw Stroke
• 150 - 280mm Punch Stroke
• Standard Units with Pressing Forces from 200 to 1000 lbs (889 N to 4.45 kN) depending on product configuration
• Ring proximity sensors
• Vibratory feeder bowl sized per application
• Quick change of peen tool
• Uses Press Perfect® technology